Why Choose Tripolymer®
Independent laboratories have tested Tripolymer® under a wide variety of construction systems for their fire ratings. It is rated as a Class 1 Building Material and does not emit hazardous gases when exposed to heat or fire. Tripolymer® will not support combustion and will not ignite or drip when under fire conditions.
Tripolymer® has an R-rating of 5.1 per inch and becomes more efficient at colder temperatures. It begins saving energy and dollars immediately upon installation and does not decrease in efficiency over time. Infiltration is greatly reduced as compared to fiberglass and blown-in type insulations and does not settle.
Tripolymer® foam does NOT expand in the wall cavities; it is already fully expanded as it leaves our equipment. Tripolymer® is cold setting foam that is installed into the wall system through specially engineered metering equipment by factory trained and certified contractors. It easily flows into hard-to- reach cavities (watch video), completely filling the cavity and starts to cure within 10 to 60 seconds after injection. Small cavities around window units, pipe chases, air ducts, and conduits can easily be retrofitted.
Tripolymer® foam helps prevent bugs and rodents from living in your walls.
√ Is Not A Urea formaldehyde based foam
√ Environmentally Safe
√ Does Not Contain or Emit CFCA’s
√ Class 1 Building Material
√ Increases Fire Ratings
√ Zero Smoke Development
√ Excellent Noise Reduction
√ Excellent R-Value 5.1/in
√ Does Not Compress or Settle
√ No Thermal Degradation
√ The original Phenolic Based Cold Setting Foam Insulation
√ Adds value to your home
|
