FAQ on Insulating Foam for Walls
What is Tripolymer foam insulation?
Tripolymer wall foam is made from the same family of thermosetting plastics as billiard balls and some fire-proof coatings.
It's safe, non-toxic and eco-friendly.
Is Tripolymer a urea formaldehyde-based foam?
Tripolymer does not use formaldehyde in the manufacturing process. (Ambient formaldehyde levels occur in parts per billion as
in water, air, hair, and etc.) It is safe, water soluble during installation, biodegradable, and does not emit toxic
gasses during or after installation.
Will this damage my walls?
No, our installers are trained and certified in the injection foam process. Unlike polyurethane foams sprayed in
attics or open cavities, Tripolymer is totally expanded upon leaving our installation equipment.
No further expansion occurs so there is no risk of blowing out walls due to foam expansion.
What is Tripolymer's R-value? Why is it important?
R-value is the standard measure of thermal resistance - resistance in temperature movement in your walls. The higher
the R-Value, the better the energy efficiency will be. Our R-value of 5.1 per inch is higher because it fills more of
your wall cavity and has a higher density.
I have fiberglass insulation in my walls. Isn't that enough?
A big part of what keeps your A/C or heater running overtime is heat and air transfer through your walls.
Even though your existing fiberglass or cellulose insulation meets minimum R-value standards, it typically
has a poor heat and air transfer rate. You can significantly reduce energy bills with a solid content insulation
such as Tripolymer.
How much can I expect to save on energy bills after Tripolymer wall foam is installed?
Our customers typically save between 25% and 50% on home heating and cooling bills in the first full year
after installation.
I spoke with a contractor who wants to use cellulose as my wall insulation. How is Tripolymer better?
First, dense-packed cellulose cannot be inserted in walls with existing fiberglass or old cellulose insulation.
Tripolymer shines when installed over old insulation and has much better air infiltration reduction qualities.”
Second, Tripolymer wall foam has an R-value, the standard measurement of thermal resistance, of 5.1 per inch,
25% above the best blown-in cellulose. Tripolymer is not subject to mold as with cellulose and has far superior fire resistance.
Can Tripolymer leak out of an existing hole in my wall?
No. Tripolymer becomes a solid within seconds of installation and becomes a fundamental part of your wall system.
Can Tripolymer increase the fire safety rating of my home?
Yes. Tripolymer can help prevent the spread of first through the walls of your home.
View our
fire resistance video.